subject
Engineering, 18.09.2019 20:30 addsd

Gaseous co2 is contained in a vertical piston-cylinder assembly by a piston of mass 60 kg and having a face area of 0.02 m2. the mass of the co2 is 4 g. the co2 initially occupies a volume of 0.005 m3 and has a specific internal energy of 300 kj/kg. the atmosphere exerts a pressure of 100 kpa on the top of the piston. heat transfer occurs slowly to the co2 from the surroundings and the volume of the co2 increases to 0.01 m3 and specific internal energy increases to 600 kj/kg. friction between the piston and the cylinder wall can be neglected. the piston is at equilibrium (no unbalanced force) all the time during the movement. the local acceleration of gravity is 9.81 m/s2. for the co2 determine (a) the final pressure at the volume of 0.01 m3, in kpa. (b) the heat transfer q occurred during the expansion process, in kj.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
You know the right answer?
Gaseous co2 is contained in a vertical piston-cylinder assembly by a piston of mass 60 kg and having...
Questions
question
Mathematics, 29.08.2019 04:41
Questions on the website: 13722361