subject
Engineering, 19.09.2019 01:30 mustafa455486a

During the cycle, the heat is added into the air in process 2-3, and process 3-4. heat is rejected in process 5-1 only. there is no heat transfer during process 1-2 and process 4-5. so q_in=q_23+q_34, and q_out=q_51. let analyze this thermodynamic cycle. process 3-4: constant pressure with heat addition into the system. (a) define your system and draw a boundary to separate your system and the surroundings. (b) for process 3-4 only, write down the energy conservation equation for the system. (c) if q34 (heat transfer into the system during process 3-4), p3 (pressure at state 3), v3 (volume at state 3) and v4 (volume at state 4) are given, rewrite energy conservation equation for part (b) and find total internal energy change for this process δu34.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
During the cycle, the heat is added into the air in process 2-3, and process 3-4. heat is rejected i...
Questions
question
History, 05.01.2020 12:31
question
Engineering, 05.01.2020 13:31
question
English, 05.01.2020 13:31
Questions on the website: 13722366