Engineering, 19.09.2019 03:00 getsic

Consider a plane composite wall that is composed of two materials of thermal conductivities ka 0.1 w/mk and kb 0.04 w/mk and thicknesses la 10 mm and lb 20 mm. the contact resistance at the interface between the two materials is known to be 0.30 m2 k/w. material a adjoins a fluid at 200°c for which h = 10 w/m2 k, and material b adjoins a fluid at 40°c for which h = 20 w/m2 k.
a)what is the rate of heat transfer through a wall that is 2.5 meters high by 2 meters side?
b)what is the temperature at the exposed surface of material a?
c)what is the temperature at the exposed surface of material b?
d)sketch the temperature distribution.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

You know the right answer?

Consider a plane composite wall that is composed of two materials of thermal conductivities ka 0.1 w...

Questions