Engineering, 19.09.2019 02:30 AK3892

The wastewater treatment plant forpine city discharges 1 × 105 m3/day of treated waste to thepine river. immediately upstream of the treatment plant, the pineriver has an ultimate cbod of 2 mg/l and a flow of 9 × 105m3/day. at a distance of 20 km downstream of the treatment plant, the pine river has an ultimate cbod of 10 mg/l. the state’sdepartment of environmental quality (deq) has set an ultimate cboddischarge limit for the treatment plant of 2,000 kg/day. the riverhas a velocity of 20 km/day. the cbod decay coefficient is 0.1/day. is the plant in violation of the deq discharge limit?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

Engineering, 04.07.2019 18:20

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

Answer

You know the right answer?

The wastewater treatment plant forpine city discharges 1 × 105 m3/day of treated waste to thepine ri...

Questions