Engineering, 20.09.2019 19:30 marissalwilliams3

4. the hubert h. humphrey metrodome in minneapolis, minnesota opened in 1982 at a cost of $55 million. to prepare for the footings, etc. 300,000 cubic yards of dirt were removed. its inflatable roof covers 10 acres and its interior column is 60 × 106 cubic feet. during construction, 40× 103 cubic yards of concrete, 11.9 × 103 tons of reinforcing steel and 5 × 102 tons of structural steel were utilized. the roof material includes an outer layer of teflon-coated fiberglass and an inner layer of woven fiberglass. given this information, answer the following: a. if removed evenly over the 10 acres, how deep of a hole would be formed as a result of the excavation? b. what is the total mass of the concrete and steel in lbm? c. if the two-layer fiberglass roofing material has a mass of 0.6667 lbm/ft2, what is the total mass of the roof? d. if 10 inches of wet snow collected on the roof as happened in 1982, what is the added mass to the roof? assume 1 inch of water equals 10 inches of snow.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

You know the right answer?

4. the hubert h. humphrey metrodome in minneapolis, minnesota opened in 1982 at a cost of $55 millio...

Questions