Engineering, 21.09.2019 02:10 beanokelley

Atank with some water in it begins to drain. the function v ( t ) = 46 − 3.5 t determines the volume of the water in the tank (in gallons) given a number of minutes t since the water began draining. what is the vertical intercept of f ? what does your answer to part (a) represent? select all that apply. the weight of the tank when it is empty. how many minutes it takes for all of the water to drain from the tank. the number of gallons of water in the tank when it starts draining. list all horizontal intercepts (or "roots") of f . what does your answer to part (b) represent? select all that apply. the weight of the tank when it is empty. the number of gallons of water in the tank when it starts draining. how many minutes it takes for all of the water to drain from the tank.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

You know the right answer?

Atank with some water in it begins to drain. the function v ( t ) = 46 − 3.5 t determines the volume...

Questions