Engineering, 23.09.2019 16:30 AM28
It will be necessary to fill a 300,000 yd3 depression, and the fill material must be compacted to 95% of the standard proctor (maximum) density. a 10% final moisture content is desired in either case. the unit weight of water is 62.4 lbf/ft3. (a). what would be the excavated volume of borrow from site a in place? (b). what would be the volume of borrow from site b in transport? (c). what soil would be cheaper to use? what’s the cost for the cheaper soil? (d). what is unit weight in transport from borrow site b?
Answers: 3
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
It will be necessary to fill a 300,000 yd3 depression, and the fill material must be compacted to 95...
English, 23.01.2022 01:40
Chemistry, 23.01.2022 01:40
Mathematics, 23.01.2022 01:40
English, 23.01.2022 01:40
Biology, 23.01.2022 01:40
English, 23.01.2022 01:40
Social Studies, 23.01.2022 01:40
English, 23.01.2022 01:40
Business, 23.01.2022 01:40