20. of these four materials used as a dielectric, which is the best insulator?
a. pure water<...
Engineering, 23.09.2019 18:30 SunsetPrincess
20. of these four materials used as a dielectric, which is the best insulator?
a. pure water
c. glass
b. petroleum
d. air
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
You know the right answer?
Questions
Mathematics, 20.11.2020 01:20
English, 20.11.2020 01:20
Arts, 20.11.2020 01:20
Physics, 20.11.2020 01:20
Mathematics, 20.11.2020 01:20
Mathematics, 20.11.2020 01:20
Chemistry, 20.11.2020 01:20
Mathematics, 20.11.2020 01:20
Mathematics, 20.11.2020 01:20
History, 20.11.2020 01:20
