subject
Engineering, 27.09.2019 02:30 CarlsonB

Avertical piston-cylinder device contains nitrogen gas at 2 bar and 0.3 m3 . at this state, a linear spring with a spring constant of 100 kn/m touches the top of the piston but exerts no force on it. the cross-sectional area of the piston is 0.1 m2 . the nitrogen gas is then heated, pushing the piston upwards against the spring, and expands until the volume of the gas doubles show the process on a p-v diagram. b. a determine final pressure (kpa) of the nitrogen gas what is the total work done (kj) during the expansion process? d. what fraction of the total work is done against the spring?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
You know the right answer?
Avertical piston-cylinder device contains nitrogen gas at 2 bar and 0.3 m3 . at this state, a linear...
Questions
question
History, 18.11.2019 17:31
Questions on the website: 13722363