subject
Engineering, 28.09.2019 00:30 cameronbeaugh

Apipe heater (long cylinder shape 30 mm outside diameter) is inserted through the side of a pipe in which water or air is flowing. the heater is perpendicular to fluid flow. when water with a temperature of 25°c and velocity of 1 m/s flows in the pipe over the heater, the power per unit length of the heater delivered to maintain the heater outer surface at a uniform temperature of 90°c is 28 kw/m length. when air, also at 25°c, but with a velocity of 10 m/s is flowing, the power per unit length to maintain the same surface temperature is 400 w/m. calculate and discuss comparisons between the convection coefficients for the flows of water and air. assume all of the power provided to the heater is given off as heat to the air or water.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
You know the right answer?
Apipe heater (long cylinder shape 30 mm outside diameter) is inserted through the side of a pipe in...
Questions
question
Mathematics, 06.03.2021 07:10
question
Spanish, 06.03.2021 07:10
question
Mathematics, 06.03.2021 07:10
question
Mathematics, 06.03.2021 07:10
question
Mathematics, 06.03.2021 07:10
question
Mathematics, 06.03.2021 07:10
question
Physics, 06.03.2021 07:10
question
Mathematics, 06.03.2021 07:10
Questions on the website: 13722367