Engineering, 29.09.2019 01:10 huntbuck14
Aspark ignition engine is to be modeled using fluid, air, is at 95 kpa and 290 k before compression. the compression ratio is 9 and the maximum temperature is 2000 k. for the calculations below use variable specific heats an ideal otto cycle. the working a) find the pressure and temperature at the end of compression (kpa, k) b) find the required heat input into the cycle on a specific basis (kj/kg) c) find the net specific work from the cycle (kj/kg) d) find the cycle thermal efficiency.
Answers: 1
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Aspark ignition engine is to be modeled using fluid, air, is at 95 kpa and 290 k before compression....
Physics, 05.11.2019 22:31
Spanish, 05.11.2019 22:31
Business, 05.11.2019 22:31
Spanish, 05.11.2019 22:31
Mathematics, 05.11.2019 22:31
Mathematics, 05.11.2019 22:31
Mathematics, 05.11.2019 22:31
English, 05.11.2019 22:31
SAT, 05.11.2019 22:31
Computers and Technology, 05.11.2019 22:31