Engineering, 01.10.2019 02:20 batmannn1516
Two pipes with length, thickness and outer diameter of 4-m, 0.4-cm and 10 cm, respectively, are used for transporting superheated vapor in a manufacturing plant. the pipes with thermal conductivity of 55 w/m. k are connected to each other through two 1- cm-thick flanges of outer diameter 19 cm. the superheated vapor flows inside the pipe at an average temperature of 483 k with a heat transfer coefficient of 180 w/m2 .k. air condition surrounding the pipes has a temperature of 283 k and a convection heat transfer coefficient of 25 w/m2 .k. (a) determine the average outer surface temperature of the pipe, disregarding the flanges. (b) considering the flanges as the fins and using this temperature for the base of the flange, determine the fin efficiency and the rate of heat transfer from the flanges. (40 points)
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
You know the right answer?
Two pipes with length, thickness and outer diameter of 4-m, 0.4-cm and 10 cm, respectively, are used...
Questions
Social Studies, 20.06.2019 18:02
English, 20.06.2019 18:02
History, 20.06.2019 18:02
English, 20.06.2019 18:02
Mathematics, 20.06.2019 18:02
Mathematics, 20.06.2019 18:02
Mathematics, 20.06.2019 18:02
Mathematics, 20.06.2019 18:02
