Engineering, 01.10.2019 16:10 granthazenp5e9mj

Athin electrical heater is wrapped around the outer surface of a long cylindrical tube whose inner surface is maintained at a temperature of 5°c. the tube wall has inner and outer radii of 25 and 75 mm, respectively, and a thermal conductivity of 10 w/m·k. the thermal contact resistance between the heater and the outer surface of the tube (per unit length of the tube) is 0.01 m·k/w. the outer surface of the heater is exposed to a fluid with t=-10 deg c and h=100 w/m^2*k. the surrounding temp is assumed to be 47 deg c. what is the heater power per unit length of tube required to maintain the heater at t=25 deg c?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

You know the right answer?

Athin electrical heater is wrapped around the outer surface of a long cylindrical tube whose inner s...

Questions