Engineering, 01.10.2019 23:00 ciara180

Uniform internal heat generation at q˙⁢ = 5.00 × 107 w/m3 is occurring in a cylindrical nuclear reactor fuel rod of 43-mm diameter, and under steady-state conditions the temperature distribution is of the form t(r)=a+br2 , where t is in degrees celsius and r is in meters, while a= 800 °c and b= -4.167 × 105 °c/m2. the fuel rod properties are k= 30 w/m·k, rho= 1100 kg/m3, and cp= 800 j/kg·k. what is the rate of heat transfer per unit length of the rod at r = 0 (the centerline) and at r = 25 mm (the surface)? if the reactor power level is suddenly increased to q2 = 108 w/m3, what is the initial time rate of temperature change at r = 0 and r = 25 mm?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj

Answers: 2

Answer

You know the right answer?

Uniform internal heat generation at q˙⁢ = 5.00 × 107 w/m3 is occurring in a cylindrical nuclear reac...

Questions