subject
Engineering, 02.10.2019 22:00 sierravick123owr441

Electrically heated draw batch furnaces are commonly used in the heat treatment industry. consider a draw batch furnace front made of a 20-mm thick steel plate with a thermal conductivity of 37 w/m·k. the furnace is situated in a room with surrounding air temperature of 20°c and an average convection heat transfer coefficient of 10 w/m2·k. if the inside surface of the furnace front is subjected to uniform heat flux of 5 kw/m2 and the outer surface has an emissivity of 0.30, determine the inside surface temperature of the furnace front in k. (round your answer up to 2 decimal places.) the stefan–boltzmann constant is 5.67 × 10-8 w/m2 . k4

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
question
Engineering, 06.07.2019 03:20
Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.
Answers: 2
You know the right answer?
Electrically heated draw batch furnaces are commonly used in the heat treatment industry. consider a...
Questions
Questions on the website: 13722362