Engineering, 05.10.2019 10:30 austinwag123

Superheated steam at an average temperature of 200°c is transported through a steel pipe (k=50 w/m-k, do = 8 cm, di = 6 cm and l = 20 m). the pipe is insulated with a 4 cm thick gypsum plaster (k=0.5 w/m-k). the insulated pipe is placed horizontally in a warehouse where the average temperature is 10°c. the steam and air side heat transfer coefficients are 800 and 200 w/m²- k respectively. calculate a) rate of heat transfer from the superheated steam b) outside surface temperature of the insulation.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

You know the right answer?

Superheated steam at an average temperature of 200°c is transported through a steel pipe (k=50 w/m-k...

Questions