Engineering, 05.10.2019 13:30 mle531588
A30 lb product 10 x 8 x 5 inches is fully encased in cushioning material with a modulus of e = 5 psi and centered in a box measuring 14 x 12 x 9 inches. find the natural frequency of the system in all six orientations. (hint: three orientations should be sufficient to describe all six. assume that only cushion material under the product will affect its response.)
Answers: 3
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
A30 lb product 10 x 8 x 5 inches is fully encased in cushioning material with a modulus of e = 5 psi...
English, 13.02.2022 20:50
Social Studies, 13.02.2022 20:50
Mathematics, 13.02.2022 20:50
Mathematics, 13.02.2022 20:50
Mathematics, 13.02.2022 20:50
Spanish, 13.02.2022 21:00
Mathematics, 13.02.2022 21:00
Mathematics, 13.02.2022 21:00
English, 13.02.2022 21:00
Mathematics, 13.02.2022 21:00
English, 13.02.2022 21:00
Mathematics, 13.02.2022 21:00
Mathematics, 13.02.2022 21:00