Acomposite wall consists of a 10-cm-thick layer of building brick of thermal conductivity k = 0.7 w/(m • °c) and 3-cm-thick plaster of thermal conductivity k = 0.5 w/(m • °c). an insulating material of thermal conductivity k = 0.08 is to be added to reduce the heat transfer through the wall by 70 percent. determine the thickness of the insulating layer.

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.