Engineering, 06.10.2019 08:30 durham953

Acylindrical fuel rod (k 5 30 w/m∙k) of 2 cm in diameter is encased in a concentric tube and cooled by water. the fuel rod generates heat uniformly at a rate of 100 mw/m3 , and the average temperature of the cooling water is 75°c with a convection heat transfer coefficient of 2500 w/m2 ∙k. the operating pressure of the cooling water is such that the surface temperature of the fuel rod must be kept below 200°c to avoid the cooling water from reaching the critical heat flux (chf). the critical heat flux is a thermal limit at which a boiling crisis can occur that cause overheating on the fuel rod surface and lead to damage. determine the variation of cen98187_ch02_p067-141.indd 133 14/02/14 3: 01 pm 134 heat conduction equation temperature in the fuel rod and the temperature of the fuel rod surface. is the surface of the fuel rod adequately cooled?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

Answer

You know the right answer?

Acylindrical fuel rod (k 5 30 w/m∙k) of 2 cm in diameter is encased in a concentric tube and cooled...

Questions