Engineering, 06.10.2019 08:30 kennethDA19

An ideal gas with a temperature independent heat capacity of cp = 29.3 j/(mol k) is used as the working uid in a carnot cycle. the upper and lower operating temperatures of the carnot cycle are th = 800 k and tc = 300 k, respectively. during isothermal expansion at 800 k, the pressure drops from 24 bar to 6 bar. (a) describe the cycle, showing sketches in the t-v and p-v planes. introduce a numbering scheme to identify each of the four state points on your sketches. (b) give values for the temperature, pressure, and molar volume at each of the four state points. (c) calculate the heat input q and work input w per mole for each of the four segments of the cycle. calculate the net heat input and net work input (which should be negative) and con rm that they are equal and opposite. con rm that the device achieves the carnot efficiency

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

Answer

You know the right answer?

An ideal gas with a temperature independent heat capacity of cp = 29.3 j/(mol k) is used as the work...

Questions