Engineering, 06.10.2019 09:02 ariana0517
A3-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k = 0.13 w/m ⋅ k), and the wire/sheath interface is characterized by a thermal contact resistance of rt ,c 3 10 m k/w ′′ = × −4 2 ⋅ . the convection heat transfer coefficient at the outer surface of the sheath is 15 w/m2 ⋅ k, and the temperature of the ambient air is 20°c. if the temperature of the insulation may not exceed 50°c, what is the maximum allowable electrical power that may be dissipated per unit length of the conductor? what is the critical radius of the insulation?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
A3-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k = 0.13 w/m ⋅ k), an...
Questions
Chemistry, 05.03.2020 22:58
Mathematics, 05.03.2020 22:58
Social Studies, 05.03.2020 22:58
English, 05.03.2020 22:58
Mathematics, 05.03.2020 22:58
