Engineering, 09.10.2019 04:10 garrettm162

5. consider a 200 kw fuel cell combined heat and power (chp) plant that is fueled with natural gas that has a lower heating value of 48.3 mj/kg. based on the lower heating value of the fuel, the power plant has a heat rate of 9000 btu/kwhe. the heat rate accounts only the production of electricity from the fuel cell and not the delivery of heat. the capacity factor of the plant is 60%. the fuel cell is a combined heat and power (chp) plant which produces 300,000 btu/h of heat energy at the rated power of 200 kw. what is the lower heating value combined heat and power efficiency of the plant (%)?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

You know the right answer?

5. consider a 200 kw fuel cell combined heat and power (chp) plant that is fueled with natural gas t...

Questions