subject
Engineering, 09.10.2019 05:00 cathydaves

6. a pump operating at steady state draws water from a pond and delivers it through a pipe whose exit is 90 ft above the inlet. at the exit, the mass flow rate is 10 lbm/s. there is no significant change in water temperature, pressure, or kinetic energy from the inlet to the exit. if the power required by the pump is 1.68 hp, determine the rate of heat transfer between the pump and its surrounds in hp and btu/min. (g = 32.0 ft/s^2.)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
You know the right answer?
6. a pump operating at steady state draws water from a pond and delivers it through a pipe whose exi...
Questions
question
Mathematics, 14.01.2021 21:10
Questions on the website: 13722367