Engineering, 09.10.2019 20:30 stanleyt

Let tpwm be 1 second. a) if tpwm is divided into 500 intervals, what is the length of each interval? b) if tpwm is divided into 500 intervals, what is the duty cycle resolution? c) say that vtrue is 4 v and vfalse is 0 v. if tpwm is divided into 10 intervals, and the desired output voltage is 2 v, how close can you get using pwm? d) say that vtrue is 4 v and vfalse is 0 v. if tpwm is divided into 10 intervals, and the desired output voltage is 3.25 v, how close can you get using pwm? e) say that you are given some tpwm and some number of intervals n to specify ton. if tpwm doubles, what happens to the size of the smallest possible ton? what happens to the duty cycle resolution?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

You know the right answer?

Let tpwm be 1 second. a) if tpwm is divided into 500 intervals, what is the length of each interval?...

Questions