subject
Engineering, 09.10.2019 23:30 trillred

Review the data below and use it to rank the plants from most desirable (1) to least desirable (7). important notes:
• native plants are plants original to a region.
• exotic plants have been introduced into an area.
• growth rate is the time required for the plant to reach maturity.
• lifespan is the length of time the plant is expected to live.
• stabilization rating is the ability of the plant to reduce erosion of the sand dune.
dune plant exotic or native tolerant of sea spray growth rate lifespan (years) stabilization rating characteristics
american beachgrass exotic yes fast 10 moderate can be damaged by pedestrian traffic; may need annual maintenance
coastal panic grass native moderately moderate 14 poor cannot tolerate large deposits of sand; good wind barrier
bitter panicum exotic yes slow 20 poor can provide cover for songbirds, water fowl, and small mammals
salt meadow cordgrass native no moderate 20 excellent can become invasive and kill other vegetation
seashore elder exotic no moderate 14 excellent produces purple flowers and spicy fragrance; heavy cover can kill other vegetation
sea oats native yes slow 20 moderate encourages burrowing animals
european beachgrass exotic yes fast 20 excellent invasive; can crowd out other vegetation

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
Review the data below and use it to rank the plants from most desirable (1) to least desirable (7)....
Questions
question
Mathematics, 02.03.2020 19:15
Questions on the website: 13722360