Engineering, 11.10.2019 05:30 jalst6084
An oil pump draws 184 hp of electric power while pumping oil with a density of 48 lbm/ft^3 at a rate of 7 ft^3/s. the inlet velocity of the pipe is 5 ft/s and the outlet velocity of the pipe is 2.1 ft/s. if the pressure of oil in the pump is measured to be 70 psi and the motor efficiency is 86%, determine: a) pump power in horsepower b) the mechanical efficiency of the pump c) the combined or overall efficiency of the pump-motor
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
An oil pump draws 184 hp of electric power while pumping oil with a density of 48 lbm/ft^3 at a rate...
Questions
Mathematics, 31.08.2019 01:10
Mathematics, 31.08.2019 01:10
History, 31.08.2019 01:10
Mathematics, 31.08.2019 01:10
Mathematics, 31.08.2019 01:10
Mathematics, 31.08.2019 01:10
Chemistry, 31.08.2019 01:10
Mathematics, 31.08.2019 01:10
Engineering, 31.08.2019 01:10
Computers and Technology, 31.08.2019 01:10
