Engineering, 11.10.2019 05:30 elizabethivy75
Sketch an edge defect and indicate the burger's vector and dislocation line.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
You know the right answer?
Sketch an edge defect and indicate the burger's vector and dislocation line....
Questions
Chemistry, 18.07.2019 17:00
Social Studies, 18.07.2019 17:00
History, 18.07.2019 17:00
Health, 18.07.2019 17:00
Chemistry, 18.07.2019 17:00
Social Studies, 18.07.2019 17:00
Business, 18.07.2019 17:00
Health, 18.07.2019 17:00
English, 18.07.2019 17:00
Mathematics, 18.07.2019 17:00
Health, 18.07.2019 17:00
Mathematics, 18.07.2019 17:00
