subject
Engineering, 13.10.2019 17:30 miamassimino

Risk assessment

section 1

produce a short report on how to undertake a risk assessment. (1000 words, must include references, text and images)

section 2

undertake a risk assessment using the following information for the work item described.
•part of the roadway outside the construction site has become damaged by the excavation lorries. it requires to be repaired in order to prevent the closure of that entrance onto the site by the local authority highways department.

•an emergency repair is proposed with quick setting concrete, but the roadway will require closure for 12 hours during this work.

•the work will be undertaken using a wheeled excavator, two ground-workers, a floor saw and three bags of quick setting concrete, along with a traffic lights control, cones and ensure that you follow the 'five steps to risk assessment')

section 3

justify the contents of a risk assessment you carried out in section 2, include you're justification for decisions made in terms of the consequences of risk, based on a clear definition of what is meant by reasonably practicable'. (500 words)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
question
Engineering, 04.07.2019 19:20
Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.
Answers: 3
You know the right answer?
Risk assessment

section 1

produce a short report on how to undertake a ris...
Questions
question
Mathematics, 28.02.2020 20:55
Questions on the website: 13722362