Around steel bar having sy = 800 mpa is subjected to loads producing calculated stresses of p∕a = 70 mpa, tc∕j = 200 mpa, mc∕i = 300 mpa, and 4v∕3a = 170 mpa. (a) sketch mohr circles showing the relative locations of maximum normal stress and maximum shear stress. (b) determine the safety factor with respect to initial yielding according to the maximum-shear stress theory and according to the maximum-distortion-energy theory.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false