Engineering, 18.10.2019 17:20 noahdeno200010125

Avery thick slab with thermal diffusivity 5.6x10^-6 m^2/s and thermal conductivity 20w/m. k js initially at a uniform temperature of 325 degree c. suddenly, the surface is exposed to a coolant at 15 degree c for which the convection heat transfer coefficient is 100 w/m^2 .k. determine temperatures at the surface and at a depth of 45 mm after 3 min have elapsed. compute and plot temperature histories (0 less than or equal to t less than or equal to 300 s) at x = 0 and x = 45 mm for the following parametric variations: alpha = 5.6 x 10^-7, 5.6 x 10^-6, and 5.6 x 10^-5 m^2/s; and k = 2, 20, and 200 w/m. k.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

Engineering, 06.07.2019 05:20

Two kg of refrigerant 134a contained in a piston-cylinder assembly is initially at 4 bar and 70°c. the refrigerant undergoes a constant pressure process to a final state of a saturated vapor. kinetic and potential energy effects can be neglected. a) show the process on a pv diagram b) determine the work for the process, in kj c) determine the heat transfer during the process, in kj

Answers: 3

Answer

You know the right answer?

Avery thick slab with thermal diffusivity 5.6x10^-6 m^2/s and thermal conductivity 20w/m. k js initi...

Questions