You are given a black box with three terminals, as shown below. the box is known to
contain five 1-ohm resistors.
a
b
c
using an ohm-meter, you measure the resistance between the terminals to be the following:
a - b: 1.5 ohms
b - c: 3 ohms
a - c: 2.5 ohms
determine the configuration of the five resistors inside the box.

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.