Engineering, 19.10.2019 04:10 armstrongstang420
Suppose that the fatigue data for the steel alloy in problem 9.28 were taken for bending-rotating tests and that a rod of this alloy is to be used for an automobile axle that rotates at an average rotational velocity of 600 revolutions per minute. give the maximum lifetimes of continuous driving that are allowable for the following stress levels: (a) 450 mpa (65,000 psi) (b) 380 mpa (55,000 psi) (c) 310 mpa (45,000 psi) (d) 275 mpa (40,000 psi).
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
Engineering, 04.07.2019 19:20
Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer,e = 5 × 105?
Answers: 2
Engineering, 06.07.2019 03:20
Explain in your own word the concept of a solid solution, in alloys, and how it can be created.
Answers: 3
You know the right answer?
Suppose that the fatigue data for the steel alloy in problem 9.28 were taken for bending-rotating te...
Questions
History, 13.09.2019 05:30
English, 13.09.2019 05:30
Mathematics, 13.09.2019 05:30
Mathematics, 13.09.2019 05:30
Mathematics, 13.09.2019 05:30
