Engineering, 19.10.2019 04:20 janetcooly

We use the stop and wait arq protocol between a sender and receiver. the transmission line that connects them has 50ms one-way propagation delay. taking all factors into account, the sender timeout is set to 140ms, and the system is working properly under these conditions. we observe now, however, that the channel has changed, and its one-way propagation delay has grown to 70ms. how much should be the new sender timeout, if there is no other change in the system? the timeout parameter should remain the same. the reason is that we consider a data link layer protocol, which does not have to deal with physical layer parameters, such as the propagation delay. due to 20ms increase in the propagation delay, the timeout should also increase with the same amount, since the other parameters, such as processing time, did not change. the new timeout parameter should be set to 180ms.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What is the main objective of using reheat rankine cycle?

Answers: 3

Answer

You know the right answer?

We use the stop and wait arq protocol between a sender and receiver. the transmission line that conn...

Questions