subject
Engineering, 20.10.2019 19:10 sirdre1982

Asteam power plant operates on a reheat rankine cycle. steam enters the high-pressure turbine at 12.5 mpa and 550 oc at a rate of 7.7 kg/s and leaves at 2 mpa. steam is then reheated at constant pressure to 450 oc before it expands in the low-pressure turbine.
the isentropic efficiency of the turbine and the pump are 85 % and 90 %, respectively. steam leaves the condenser as a saturated liquid. if the moisture content of the steam at the exit of the turbine is not to exceed 5 percent, determine (a) the condenser pressure, (b) the net power output, and (c) the thermal efficiency

need answers asap.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
You know the right answer?
Asteam power plant operates on a reheat rankine cycle. steam enters the high-pressure turbine at 12....
Questions
question
Business, 19.07.2019 10:00
Questions on the website: 13722359