subject
Engineering, 21.10.2019 23:10 cooljazzy1234

Avertical plate has a sharp-edged orifice at the center. a jet of speed v strikes the plate concentrically. obtain an expression for the external force needed to hold theplate in place. if the jet leaving the orifice also has speed v. evaluate the force for v=15ft/s, d=4 in, and d=1. plot the required force as a function of diameter ratio for a suitable range of daimaeter d.?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
Avertical plate has a sharp-edged orifice at the center. a jet of speed v strikes the plate concentr...
Questions
question
Mathematics, 19.10.2019 11:30
Questions on the website: 13722363