Uniform internal heat generation at q˙⁢ = 5.00 × 107 w/m3 is occurring in a cylindrical nuclear reactor fuel rod of 43-mm diameter, and under steady-state conditions the temperature distribution is of the form t(r)=a+br2 , where t is in degrees celsius and r is in meters, while a= 800 °c and b= -4.167 × 105 °c/m2. the fuel rod properties are k= 30 w/m·k, rho= 1100 kg/m3, and cp= 800 j/kg·k. what is the rate of heat transfer per unit length of the rod at r = 0 (the centerline) and at r = 25 mm (the surface)? if the reactor power level is suddenly increased to q2 = 108 w/m3, what is the initial time rate of temperature change at r = 0 and r = 25 mm?

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.