subject
Engineering, 23.10.2019 23:00 jayjinks976

An information security manager conducted a gap analysis, which revealed a 75% implementation of security
controls for high-risk vulnerabilities, 90% for medium vulnerabilities, and 10% for low-risk vulnerabilities. to
create a road map to close the identified gaps, the assurance team reviewed the likelihood of exploitation of
each vulnerability and the business impact of each associated control. to determine which controls to
implement, which of the following is the most important to consider?
a. kpi
b. kri
c. grc
d. bia

explain the answer, if you’re not sure do not answer the question

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
An information security manager conducted a gap analysis, which revealed a 75% implementation of sec...
Questions
question
Chemistry, 20.07.2021 04:40
question
Mathematics, 20.07.2021 04:40
Questions on the website: 13722362