subject
Engineering, 23.10.2019 23:00 Littllesue2

3. a civil engineer is analyzing the compressive strength of concrete. compressive strength is normally distributed with σ2 = 1000 (psi)2 . a random sample of 12 specimens has a mean compressive strength of 3250 psi. (a) construct a 95% two-sided confidence interval on the mean compressive strength. (b) suppose it is desired to estimate the mean compressive strength with an error that is less than 15 psi at 99% confidence. what is the sample size required?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
You know the right answer?
3. a civil engineer is analyzing the compressive strength of concrete. compressive strength is norma...
Questions
question
Chemistry, 22.08.2019 14:10
Questions on the website: 13722367