subject
Engineering, 24.10.2019 01:00 Dancy31uv

A20-person fraternity is making their weekend plans around 5 different parties in iv. each brother will attend exactly one of the parties. fraternity rules state that the fraternity must have a representative at each party. assume that only the number of brothers that show up at a party is important, i. e. the brothers are indistinguishable. (a) how many different arrangements of plans are possible? (b) how many different arrangements of plans are possible so that none of the bros in the fraternity have to attend a party alone? (c) suppose one specific party is planning to have pizza bites

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
A20-person fraternity is making their weekend plans around 5 different parties in iv. each brother w...
Questions
question
English, 24.05.2021 18:30
question
Physics, 24.05.2021 18:30
question
Mathematics, 24.05.2021 18:30
Questions on the website: 13722361