Engineering, 25.10.2019 01:43 sergiogautosg15
Asteel rotating-beam test specimen has an ultimate strength of 1100 mpa. estimate the fatigue strength corresponding to a life of 150 kcycles of stress reversal.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
Asteel rotating-beam test specimen has an ultimate strength of 1100 mpa. estimate the fatigue streng...
Questions
Mathematics, 02.02.2021 20:50
Mathematics, 02.02.2021 20:50
Engineering, 02.02.2021 20:50
Mathematics, 02.02.2021 20:50
Mathematics, 02.02.2021 20:50
Mathematics, 02.02.2021 20:50
