Engineering, 25.10.2019 01:43 autumperry3599

At the beginning of the compression process of an air standard otto cycle, p1 = 1 bar, t1 = 300 k. the maximum temperature in the cycle is 2250 k and the compression ratio is 9.8. the engine has 4 cylinders and an engine displacement of vd = 2.3 l. determine per cylinder: a) the volume at state 1.
b) the air mass per cycle.
c) the heat addition per cycle, in kj.
d) the heat rejection per cycle, in kj.
e) the net work per cycle, in kj.
f) the thermal efficiency.
g) the mean effective pressure, in bar.
h) develop a full exergy accounting per cycle, in kj. let t0 = 300 k, p0 = 1 bar.
i) devise and evaluate the exergetic efficiency for the cycle.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

You know the right answer?

At the beginning of the compression process of an air standard otto cycle, p1 = 1 bar, t1 = 300 k. t...

Questions