subject
Engineering, 25.10.2019 01:43 aubrey13m

Astraight round shaft is subjected to a torque of 5000 lb•in. determine the required diameter, using steel with a tensile yield strength of 60 ksi and a safety factor of 2 based on initial yielding: (a) according to the maximum-normal-stress theory. (b) according to the maximum-shear-stress theory. (c) according to the maximum-distortion-energy theory. discuss briefly the relative validity of the three predictions

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
Astraight round shaft is subjected to a torque of 5000 lb•in. determine the required diameter, using...
Questions
question
English, 31.08.2019 18:10
question
Mathematics, 31.08.2019 18:20
Questions on the website: 13722367