subject
Engineering, 28.10.2019 20:31 david838843

What is the average linear (seepage) velocity of water in an aquifer with a hydraulic conductivity of 6.9 x 10-4 m/s and porosity of 30% if the hydraulic gradient is 0.0014? a. 0.28 m/d b. 3.2 m/d c. 0.08 m/d d. 0.003 m/d

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 06.07.2019 03:10
Explain the strain-hardening phenomenon on the basis of dislocation - dislocation strain field interactions. also, briefly describe what generally happens to the ductility of a metal that has been strain hardened (i.e. does strain hardening make a metal more ductile or
Answers: 3
You know the right answer?
What is the average linear (seepage) velocity of water in an aquifer with a hydraulic conductivity o...
Questions
question
Mathematics, 28.04.2021 05:00
question
Mathematics, 28.04.2021 05:00
question
Mathematics, 28.04.2021 05:00
Questions on the website: 13722362