subject
Engineering, 30.10.2019 02:31 chantihock05

In the book the hunt for red october a russian submarine is described which uses a silent "caterpillar" drive instead of a propeller. even though the propulsion system is very quiet, the submarine may still make a lot of noise if it goes too fast. the reason is that, if the speed of the submarine is too great, the static pressure at the point of maximum velocity over the submarine will drop below the vapor pressure for saturated water and the water will boil or cavitate. when the bubbles thus formed collapse, they make a lot of noise, making it easy to detect the submarine. the flow will not cavitate as long as the static pressure is greater than the vapor pressure of saturated water, p_v. for the purposes of this problem, assume the ocean has a uniform density rho = 1000 kg/m^3, atmospheric pressure acting on the surface of the ocean is p_a = 101 kpa (1.01 times 10^5 n/m^2), the acceleration due to gravity is g = 9.81 m/s^2, the vapor pressure of saturated water at 12 degree c is p_v = 1.4 kpa, and that the entire ocean has a uniform temperature of 12 degree c.

if the maximum velocity over the surface of the submarine is 2.0 times the freestream velocity, how fast can the submarine go at a depth of 100 m without cavitating? in order to go faster without being detected should the submarine increase or decrease its depth? explain your answer.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 19:10
A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?
Answers: 3
question
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
You know the right answer?
In the book the hunt for red october a russian submarine is described which uses a silent "caterpill...
Questions
question
Mathematics, 28.01.2020 01:31
Questions on the website: 13722363