Engineering, 30.10.2019 03:31 ashtor1943
Calculate the rwl and the li for the following task. as forgings exit a cooling bath, they are loaded into various tumblers for finishing. each forging weighs 15 pounds and is lifted from a conveyor that is 36 inches high to a tumbler that is 48 inches high. the forgings are relatively small, so the hands are only 5 inches from the waist. the process completes a forging every 10 seconds. the coupling is considered fair, and the operator works a full 8-hour shift.
Answers: 2
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Calculate the rwl and the li for the following task. as forgings exit a cooling bath, they are loade...
English, 01.09.2019 07:00
Mathematics, 01.09.2019 07:00
Health, 01.09.2019 07:00
Mathematics, 01.09.2019 07:00
Mathematics, 01.09.2019 07:00
Social Studies, 01.09.2019 07:00
History, 01.09.2019 07:00
Mathematics, 01.09.2019 07:00
Social Studies, 01.09.2019 07:00