Engineering, 30.10.2019 04:31 jahnoibenjamin

Assume the system in problem 2) is being excited by pure white noise (random excitation). solve the problem via fourier transforms (equations 12.44 and 12.45 in your textbook). take the fourier transform of the equation. the fourier transform of white noise is constant in the frequency domain. after solving for x(f), take the inverse fourier transform to obtain x(t). this solution is equivalent to another type of solution covered in the course. 2) a vibrating system has the following constants: w=40.6 lb, k=50lb/in.,and c=0.40 lb/in. per sec. determine a) the damping factor, b) the natural frequency of damped oscillation, c) derive the frequency response function (frf) and plot it as a bode plot (matlab or excel) d) find the half power bandwidth, predict damping factor via the half power bandwidth. f(w) = gearul d2 f(t)e-iwt dtombow.2 (12.44) pilotion ) = 2xlfw)elul de wo (12.45) turn 27 j-00

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

Answer

Engineering, 06.07.2019 02:30

Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers

Answers: 3

Answer

Engineering, 06.07.2019 03:20

Acountershaft is supported by two tapered roller bearings using indirect mounting. the radial bearing loads are 1120 lb for the left-hand bearing and 2190 lb for the right-hand bearing. the shaft rotates at 400 rpm and is to have an l10 life of 40,000 hours and an application factor of 1.4. assume ka2k 15, and find the required radial rating of each bearing

Answers: 3

Answer

You know the right answer?

Assume the system in problem 2) is being excited by pure white noise (random excitation). solve the...

Questions