subject
Engineering, 30.10.2019 05:31 Tcutety

)(10 points) an equal-tangent sage curve has its pvi at station 10+00 and elevation at 138 ft. directly above the pvi, the bottom of an overpass structure is at elevation 162 ft. the pvc is at station 4+00. if the initial grade is -4%, what is the highest possible value of the final grade given that a 70 mph design speed is to be provided in daytime condition? what is the highest possible final grade i nighttime conditions? (ignore the cross-sectional width of the overpass)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
question
Engineering, 06.07.2019 02:30
A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.
Answers: 1
You know the right answer?
)(10 points) an equal-tangent sage curve has its pvi at station 10+00 and elevation at 138 ft. direc...
Questions
question
Mathematics, 10.09.2021 01:00
question
Mathematics, 10.09.2021 01:00
question
Mathematics, 10.09.2021 01:00
Questions on the website: 13722362