Engineering, 30.10.2019 07:31 paralaw61772
To enhance heat transfer from a silicon chip of width : 4 mm on a side, a copper pin fin is brazed to the surface of the chip. the pin length and diameter are / 12 mm and ' 2 mm, respectively, and atmospheric air at 9 10 m/s and 7 300 k is in cross flow over the pin. the surface of the chip, and hence the base of the pin, are maintained at a temperature of 7e 350 k. calculate the average heat convection coefficient from the surface of the fin. neglect the effect of the chip on the flow and the fin tip. using the he value from (a) determine the pin fin heat transfer rate. assuming the he value above applies for the chip itself too: determine the total heat loss from the chip and fin.
Answers: 1
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
To enhance heat transfer from a silicon chip of width : 4 mm on a side, a copper pin fin is brazed...
History, 26.07.2019 18:00
Mathematics, 26.07.2019 18:00
Biology, 26.07.2019 18:00
Social Studies, 26.07.2019 18:00
Spanish, 26.07.2019 18:00
Biology, 26.07.2019 18:00
History, 26.07.2019 18:00
Spanish, 26.07.2019 18:00