subject
Engineering, 31.10.2019 00:31 edwmal638

When fluid flows through a pipe, the reynolds number will output whether the flow is laminar (smooth, re < 2100), transitional, or turbulent (re > 4000). the reynolds number is expressed as re = rhov d µ where rho is the density, v is the flow velocity and d is the pipe diameter, and µ is the fluid (dynamic) viscosity with units [µ] = kg/(m · s). (a) verify that the reynolds number is dimensionless using si units.

(b) if water at room temperature (20oc) flows through a pipe with a diameter of 10 cm at a speed 1 cm/s, is the flow laminar, transitioning, or turbulent? you should use rho = 998.2 kg/m3 and µ = 1.002 × 10−3 kg/(m · s). show your work.

(c) the flow in part (3b) is maintained by a pump which produces a constant volumetric flow rate q = v · a = 7.854 × 10−5 m3/s, where a = πd2/4 is the pipe’s cross-section area. derive a reynolds number involving q rather than v .

(d) if the flow in parts (3b) and (3c) suddenly transitions from a 10 cm diameter pipe to one with diameter 2 cm. what behavior do you expect in the narrower pipe?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
You know the right answer?
When fluid flows through a pipe, the reynolds number will output whether the flow is laminar (smooth...
Questions
question
Mathematics, 10.10.2019 08:00
Questions on the website: 13722363