Engineering, 31.10.2019 06:31 Ezekielcassese

2. a dvd drive is mounted on a chassis and is modeled as a single degree-degree-of-freedom spring, mass and damper. during normal operation, the drive (having a mass of 0.4 kg) is subject to a harmonic force of 1 n at 10 rad/s. because of material considerations and static deflection, the stiffness is fixed at 500 n/m and the natural damping in the system is 10 kg/s. the dvd player starts and stops during its normal operation providing initial conditions to the module of x0 = 0.001 m and v0 = 0.5 m/s. the dvd drive must not have an amplitude of vibration larger than 0.008 m even during the transient stage. first compute the response by numerical simulation to see if the constraint is satisfied. if the constraint is not satisfied, find the smallest value of damping that will keep the deflection less than 0.008 m.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

Answer

You know the right answer?

2. a dvd drive is mounted on a chassis and is modeled as a single degree-degree-of-freedom spring, m...

Questions